| |
100A Brushless ESC (Governer Mode) RCE-BL100G  Description:
Fearture:
●Three programmable throttle speed settings to support quick throttle response.
●Govener Mode
●Small and compact PCB design for ease of installation.
●Large heatsink for great thermal performance.
●High compatibility works with 98% of brushless motors.
●Ultra smooth motor start to run with all kinds of brushless motors.
●The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
●The throttle has more than 200 steps resolution that provides great controlling sense.
●Users can use the transmitter to operate the motor setting by Super stylized CPU.
●If the aircraft should land or crash and become lost, the pilot can enable the Aircraft Locator Option. The ALO is engaged by turning off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm. The sound of the alarm may aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PPM receivers.
● approval(0503028)
|
Specification |
●Continuous current:100Amps with proper air flow
●Surge current:135Amps
●Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
●Supporting maximum RPM:2poles=>190,000rpm
●Supporting input voltage:5.5V~25.2V | ●Supporting battery types: Li-ion/ Li-poly 2~6 cells, Ni-Mh 6-18 cells
●Size:72X28X14mm
●Weight:69g
NOTE: Not including BEC. User need to provide the power for receiver and servo. |
| |
450V2 CCPM Metal Swashplate HS1111-84  Description:
●Grommet is made of nylon with MoS2. It Features wear-resisting and smooth for quick movement of swashplate. It improve control precision and lifetime.
|
Contents |
●Weight:14.7g/set
●CCPM Metal swashplate case x 1
●Metal stand x 1
●Metal cover x 1
●Grommet x 2
●Ball bearing x 1(Φ5xΦ10x7mm) | ●Linkage ball x 6
●Long linkage ball x 1
●Bearing 6803ZZ x 1(Φ26xΦ18.5x4mm)
●Cross screw(M2x6.5mm) x 6
●Cross screw(M2x15mm) x 1 |
| |
450V2 Metal Tail Holder Set HS1189-84 
Description: Metal tail holder features high precise ball and high rigid CNC processes aluminium alloy holder and T-type hub, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight.
Cutaway Drawing: 
|
Contents |
●Stainless steel tail rotor hub x 1
●3x3 Set screw x 1
●Metal tail rotor housing x 2
●Bearing MR63ZZ x 2(Φ3xΦ6x2.5mm) | ●Bearing MR52ZZ x 2(Φ2xΦ5x2.5mm)
●Collar screw x 2(M2x8mm)
●Screw x 2(M2x8mm) |
| |
450V2 Metal Tail Unit HS1108-84 
Description: T-REX metal tail unit features high precise bearing structure and high rigid CNC processes aluminium alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight.
|
Contents |
●Metal tail unit housing (R) x 1(29.5X14.75X3.7mm)
●Metal tail unit housing (L) x 1(29.5X14.75X3.7mm)
●Tail gear case x 1
●Metal control arm holder x 1
●Bearing MR83ZZ x 2(Φ3XΦ8X3mm)
●Aluminium collar x 3(Φ3XΦ4X8.5mm)
●Socket button head screw x 3(M2x4mm) | ●Socket button head screw x 1(M2x6mm)
●Socket button head screw x 5(M2x12mm)
●Socket button head screw x 1(M2x14mm)
●Collar screw x 1(M2x9)
●Washer x 2(Φ2XΦ3.8X0.2mm)
●Tail pulley assembly x 1(Φ8XΦ4.5X5mm)
●Bearing MR52ZZ x 1(Φ2XΦ5X2.5mm) |
| |
450V2 Metal Control Lever HS1215-84 
Description: T-REX metal control lever features high precise double bearing structure and high rigid CNC processes aluminium alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight. |
Contents |
●Aluminum SF mixing lever x 2
●Aluminum washout control arm x 2
●Collar x 2(Φ1.4xΦ3x2.4mm)
●Washout arm x 2
●Collar screw x 2(M1.4x6.5mm)
●Washer x 8(Φ2xΦ3.6x0.2mm) | ●Washer x 8(Φ2xΦ3.6x0.5mm)
●Bearing MR52ZZ x 8(Φ2xΦ5x2.5mm)
●Stainless steel linkage ball x 6(Φ4.75x4.59mm)
●Cross screw x 6(M2x6.5mm)
●Collar Screw x 4(M2x8mm) |
| |
450V2 Metal Washout Control Arm HS1204-84 
Description: T-REX metal Washout control arm set features high precise double bearing structure and high rigid CNC processes aluminium alloy material. Upgrade component is absolutely helpful for the accuracy of flying movement control and the stable of the flight. |
Contents |
●Metal washout control arm x 2
●Washout arm x 2
●Collar x 2(Φ1.4xΦ3x2.4mm)
●Washer x 4(Φ2xΦ3.6x0.2mm)
●Washer x 2(Φ2xΦ3.6x0.5mm) | ●Bearing MR52ZZ x 4(Φ2xΦ5x2.5mm)
●Stainless steel ball link x 2(Φ4.75x4.59mm)
●Cross screw x 2(M2x6.5mm)
●Collar Screw x 2(M2x8mm)
●M1.4 collar Screw x 2(M1.4x6.5mm) |
| |
450V2 Metal Flybar Seesaw Holder HS1207-84 
Description: T-REX metal flybar seesaw holder features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight. |
| Contents: |
●Metal flybar seesaw holder x 1
●Bearing FMR52ZZ x 2(Φ2xΦ5xΦ6x2.3mm)
●Bearing MR52ZZ x 2(Φ2xΦ5x2.5mm)
●Collar screw x 2(M2x6.5mm) |
| |
450V2 Metal Flybar Control Set HS1081-84 
Description: T-REX metal flybar control set features high precise bearing structure and high rigid CNC processes aluminium alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight. |
| Contents: |
●Metal flybar control set x 1
●Metal flybar arm collar x 2
●Set screw x 2(M3x3mm)
●Cross screw x 4(M2x5mm) |
| |
450V2 Metal Washout Base HS1196-84 
Description: New metal washout base has modified the length of the collar, to reduce the clearance between the washout base and the control levers for great 3D performance. |
| Contents: |
●Metal washout base x 1
●Collar x 1(Φ5xΦ6.5x13mm) |
| |
450V2 Aluminium Tube HS1188-84 
Description: Replacement Spacer Set |
| Contents: |
●Frame mounting bolt x 2(Φ4x22mm)
●Aluminium tube x 6(Φ3.5x19.7mm)
●Aluminium link x 2(Φ5xΦ2x7.5mm) |
| |
450V2 Fuselage Parts HS1178-84 
Description: Replacement Spacer Set |
| Contents: |
●M2 special washer x 6
●Aluminium bolt x 6(Φ3.5x19.7mm)
●Socket button head screw x 6(M2x6mm)
●Socket button head screw x 4(M2x14mm) |
| |
450V2 Canopy HS1237 
Description: Painted Fibreglass Canopy |
| Contents: |
●Canopy x 1
●Canopy nut x 2
●Sticker x 1 |
| |
3K Carbon Flybar Paddle HS1256 
Description: For Use with 450 Class Helis these carbon paddles sharpen cyclic response. |
| Contents: |
●3K Carbon flybar paddle x 2
●Size:50 x 31 x 4.3mm
●Weight:7.8g / pcs |
| |
600 Metal Tail Torque Tube Unit H60133 Description:
Use for T-REX 600 - These parts of Metal Tail Torque Tube Unit are for the Torque Tube Drive Version Only.
|
Contents |
●600 Metal plate(L) x 1
●600 Metal plate(R) x 1
●600 Metal tail unit set x 1
●600 Control arm mounting bolt x 1
●600 Tail rotor shaft assembly x 1
●Aluminum bolt x 1(Φ4.98x24mm)
●600 Rear umbrella gear(20T) x 1(Φ21.2x13.2mm)
●Bushing x 1(Φ12.4xΦ18x10mm) | ●Pin x 1(Φ1.5x8.8mm)
●Bearing MR105ZZ x 2(Φ5xΦ10x4mm)
●Bearing 6701ZZ x 2(Φ12xΦ18x4mm)
●Screw x 2(M2x5mm)
●Screw x 1(M3x8mm)
●Screw x 2(M3x10mm)
●Socket button head screw x 6(M3x6mm)
●M3 special washer x 2(Φ3xΦ8x2mm) |
| |
450V2 Main Frame HS1244-75 
|
| Contents: |
●Carbon upper frame x 1
●Carbon lower frame x 1 |
| |
450V2 Main Rotor Head Set HS1255 Description: ●Using new Main rotor holder with thrust bearing and 4mm Feathering shaft, features smooth rotation and stability under high rotation speed.
●New metal head stopper.
●High precise bearing structure and high rigid CNC processed aluminium alloy material, and therefore this upgrade is vital for the accurate of Flight Control and Stability. |
Contents: |
●Metal main rotor housing set x 1
●Metal head stopper x 1
●Screw x 1
●Pin x 2
●Aluminium collar x 2
●Damper Rubber x 4
●Washer x 2
●Stainless steel linkage ball x 2
●Cross screw x 2 | ●Metal main rotor holder x 2
●Thrust Bearing F3-8M x 2
●Bearing MR74ZZ x 2
●Bearing MR84ZZ x 2
●Feathering shaft x 1
●Washer x 2
●Screw x 2
●Screw x 1
●M2 nut x 1 |
| |
600 Metal Tail Belt Unit Set H60132
 Description:
All new Aluminium Alloy Gearbox for the Belt Driven Version of the TREX 600. |
Contents |
●600 Metal plate (L) x 1
●600 Metal plate (R) x 1
●600 Metal Tail Belt Unit x 1
●600 Control arm mounting bolt x 1
●Metal tail rotor shaft assembly x 1
●Drive pulley(9T) x 1
●Pulley cover x 2
●Aluminium bolt x 1 | ●Bearing MR105ZZ x 2
●Socket screw x 2
●Socket screw x 1
●Socket screw x 2
●Socket button head screw x 6
●M3 washer x 2
●Slide bush x 1 |
| |
| |
| |
| |
![[Company Logo Image]](images/Align%20UK1.jpg)
![[Under Construction]](images/undercon.gif)
