Kit Contents

The T-REX 450S CF(eCCPM) helicopter is great for 3D flight and wind resistance, the main frames are made from high strength Carbon Fibre and light Aluminum Alloy material, suitable for 3D Acrobatics and Beginners. This kit is for flyers who want uncompromised performance and quality. This kit comes 80% pre-assembled!
●1mm Carbon Fibre main frames features the rigidity and great for 3D flight.
●3K Carbon Fibre battery mounting plate is fixed to Aluminum Alloy mounting plate mount for connecting to main frames. Set the battery here and make the center of gravity close to the rotor blade sides for reducing the trim when the heli rolling.
CNC Main rotor housing is made by hard Aluminum Alloy material.
●Using Bell and Hiller two systems mixing control. Through simple structure of Bell control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
●New streamlined Carbon Tail Rotor Blades makes the gyro more efficient.
●New design for Tail pitch assembly, upgrade to ball control slider bushing with Dual Bearing, add collars to ball links for reducing the gaps, makes the change of pitch travel smoother.
●Using new design on tail rudder control rod and control guide for smooth control, the design is Same as TREX 600.
●Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don’t need to add the weight, but you can see the flexibility of 3D actions.
●New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safety.
●Using super strength drive belt and tail drive gear, features wear resistant to reduce power loss.
●Stainless Steel linkage balls are used - wear resistance, anti-oxidization.
●Tail rotor hub made of Stainless Steel - Very Rigid.
●33 Precision Bearings.
●Great stable and sensitive mixing lever design! Gives great stability and precision for 3D flight.
●Special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter!

• Length:650mm(25.6 in)
• Height:228mm(9.0 in)
• Main Blade Length:325mm
• Main Rotor Diameter:700mm(27.6 in)
• Tail Rotor Diameter:150mm(5.9 in)
• Motor Pinion Gear:12T/13T
• Main Drive Gear:150T
• Autorotation Tail Drive Gear:106T
• Tail Drive Gear:25T
• Drive Gear Ratio:1:12.5:4.24/1:11.5:4.24
• Weight(w/o main blade):380g(0.84 lbs)
• Flying Weight:Approx 650~680g(1.43~1.50 lbs)

• 33 Precision Bearings
• Auto-Rotation System
• Rear Tail Servo Mount
• Collective Pitch System
• Tail Rotor Drive Belt System
• Main Drive Gear with Cooling Fan

• T-REX 450S CF Kit Combo Set
• 325 Carbon Rotor Blade
• RCE-BL35X 35A Brushless ESC (Govener Mode)
• New 430L Brushless motor (3550KV)