Don't fancy the building - we've done all the hard work the TREX 450 S ARF has many of the features found on the SE range that has made it the first choice for leading pilots across the world.
| High precision metal main rotor housing and stainless steel linkage ball | CNC high strength Aluminum Alloy main frames | Anti-rotation bracket & New swashplate |
| | |
| Main drive gear with patent dual cooling fan design | New tail rotor assembly with dual bearing | New Tail rudder control rod & control guide |
| | |
| 325 carbon rotor blade | New 430L 3550KV brushless motor | RCE-BL35X electronic speed controller |
| | |
Package |
|
| Description | Specification |
The T-REX 450S (eCCPM) helicopter is great for 3D flight and wind resistance, the main frames are made by high strength light Aluminum Alloy and Carbon Fibre material, suitable for 3D Acrobatics and Beginners.
●Helicopter completely assembled. The users only need to simply install the power/electronic equipment and make some adjustments. Then enjoy the flight.
●1mm CNC Aluminum Alloy main frames features the rigidity and great for 3D flight.
●Aluminum Alloy battery mounting plate is fixed to Aluminum Alloy mounting plate mount for connecting to main frames. Set the battery here and make the center of gravity close to the rotor blade sides for reducing the trim when the heli rolling.
CNC Main rotor housing is made by hard Aluminum Alloy material.
●Using Bell and Hiller two systems mixing control. Through simple structure of Bell control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
●New streamlined Carbon Tail Rotor Blades makes the gyro more efficient.
●New design for Tail pitch assembly, upgrade to ball control slider bushing with Dual Bearing, add collars to ball links for reducing the gaps, makes the change of pitch travel smoother.
●Using new design on tail rudder control rod and control guide for smooth control, the design is Same as TREX 600.
●Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don’t need to add the weight, but you can see the flexibility of 3D actions.
●New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safety.
●Using super strength drive belt and tail drive gear, features wear resistant to reduce power loss.
●Stainless Steel linkage balls are used - wear resistance, anti-oxidization.
●Tail rotor hub made of Stainless Steel - Very Rigid.
●33 Precision Bearings.
●Great stable and sensitive mixing lever design! Gives great stability and precision for 3D flight.
●Special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter! | ●Length:650mm(25.6 in)
●Height:228mm(9.0 in)
●Main Blade Length:325mm
●Main Rotor Diameter:700mm(27.6 in)
●Tail Rotor Diameter:150mm(5.9 in)
●Motor Pinion Gear:12T/13T
●Main Drive Gear:150T
●Autorotation Tail Drive Gear:106T
●Tail Drive Gear:25T
●Drive Gear Ratio:1:12.5:4.24/1:11.5:4.24
●Weight (w/o main blade): 400g(0.88 lbs)
●Flying Weight: Approx 650~680g(1.43~1.50 lbs) |
Features |
33 Precision Bearings
Auto-Rotation System
Rear Tail Servo Mount
Collective Pitch System
Tail Rotor Drive Belt System
Main Drive Gear with Cooling Fan |
Kit Contents Included |
●T-REX 450S ARF Combo Set
●325 Carbon Rotor Blades
●RCE-BL35X 35A Brushless ESC (Govener Mode)
●New 430L Brushless motor (3550KV) |
| Additional Equipment Required for Operation |
●Lithium Battery:DC11.1V(1300mAh or more)
●Transmitter:6 channel or more For Helicopter System
●Receiver:6 channel or more
●Gyro:1pc
●Cyclic Servos:3pcs
●Rudder servo:1pc |
| |
![[Company Logo Image]](images/Align%20UK1.jpg)
![[Under Construction]](images/undercon.gif)
